Export / import settings
Navigation: Settings → System → Export / Import
Save this device's settings, photos, image sets and schedules in one .zip file. You can later import it back into the same device (backup and restore), or import it into another device so both have the same content.
What's in the file
| Item | Included | Description |
|---|---|---|
| Photos | Included | The uploaded original files, with their rotation, fit mode and image gallery order; thumbnails and the converted files for the panel are regenerated automatically after import |
| Image sets | Included | Name, the photos they contain and their order |
| Multi-panel bulletin board | Included (multi-panel models) | Each panel's playlists, layouts, time slots and the pause after manual selection, plus the media library files and their publish and unpublish times. Panel wiring and registration are not included; use Export installation settings on the Installation page. This part is skipped when imported into a model that is not a multi-panel model |
| Schedules | Included | Name, frequency, image set used, enabled or not |
| Light schedules | Included | Name, frequency, on or off, enabled or not |
| User settings | Included | Startup screen, screen language, refresh mode, scan direction, edge mask, sleep, button gestures, presenter remote (including page-turn behavior), G-Sensor and screen orientation, manual light state |
| Hotspot settings | Included | Hotspot name, security type, channel, and "Allow DFS channels" |
| Hotspot password | Only included when an export password is set | Encrypted with the export password and put in the file; see Export password |
| Wi-Fi networks you've added | Names only | Wi-Fi passwords can't be exported. On import only the names of these networks are listed; you need to add them again yourself under "Network" |
| Model data (screen size, battery, LEDs, etc.) | Not included | Belongs to the device itself; importing doesn't change it |
| Brand | Not included | Same as above |
| Cluster | Not included | Same as above |
| System logs | Not included | — |
| Time zone, time | Not included | — |
| Network mode, Ethernet settings | Not included | — |
Exporting a settings file
- Press Export to the right of "Export settings".
- If you want, enter an "Export password (optional)", then enter the same password in "Enter the export password again". If you don't need one, just leave them blank.
- Press Export. The screen shows "The download has started", and your browser downloads the file.
The file name has the format chlcd-backup-<device name>-<yyyymmdd>-<hhmm>.zip.
- The file is about as large as all the original photo files together (photos aren't compressed again).
- When exporting, the device first assembles the whole file in its own storage; if there isn't enough space, "Export failed. Please try again later" appears.
- With many photos, downloading on a phone can take a while; a computer is recommended.
Export password
| When exporting | Hotspot password in the file | When importing |
|---|---|---|
| With an export password | Encrypted and put in the file | You must enter the same export password to import; the hotspot password is replaced with the one in the file too |
| Without an export password | No password stored at all | No password needed; the hotspot name and other settings are applied as usual, and this device keeps its current hotspot password |
- The export password must be at least 4 and at most 128 characters. If the two entries differ, "The two export passwords do not match" appears.
- The export password isn't stored on the device. If you forget it, you can't import from this file (you can only export a new one).
- The export password protects only the hotspot password. Photos, image sets, schedules and settings in the file are not encrypted; keep the file as carefully as you would the photos.
Importing a settings file
Importing replaces, it doesn't merge
"Importing replaces this device's photos, image sets, schedules and settings. The current ones will be deleted." If you need to keep the current content, export a settings file from this device first.
Press Import to the right of "Import settings".
Choose a
.zipfile you exported earlier. A progress bar is shown while it uploads. Nothing has been changed yet at this point.Check the details on the screen:
Field Content Source The name and screen resolution of the device that exported the file Exported at When the file was exported Contents Number and total size of photos, and the number of image sets, schedules and light schedules Depending on the situation, these notices appear:
Notice When it appears The source device has a different screen size. Photo display settings may need adjusting. The two devices have different screen resolutions The hotspot will change to "hotspot name". Phones or computers on the hotspot will be disconnected and need to join the new one. The file contains hotspot settings Wi-Fi passwords cannot be exported. Add these networks again under Network after importing: (network names) The source device has Wi-Fi networks added by users If the file has an export password, enter it in "Enter the export password" (you can't go on without it).
Press the red Replace and import. The screen shows "Importing…", then "Imported. Restarting…". During this time, "Please keep this page open".
When "Import complete" and the number of imported photos, image sets and schedules appear, press Done; the page reloads.
If you decide not to import, press Cancel in steps 3–5; the uploaded file is discarded and this device isn't affected.
Import order
The import runs in the order below; the earlier a step, the less it can affect existing data:
- The file format and export password are checked. If the password is wrong, it stops here with nothing changed yet, and you can enter the password again and retry.
- The device checks whether its storage can hold all the new photos. If not, it stops with nothing changed yet.
- The new photos are added. If this step fails, the photos just added are deleted and the original photos are not affected at all.
- The new image sets, image gallery order, settings and schedules are created. All the original content is still there at this point; if this step fails, everything just created is removed and the settings go back to their original values, so the device is the same as before the import.
- Only once all the new content is in place are the original image sets, schedules and photos deleted.
- The hotspot settings are applied (last, because as soon as the hotspot changes, phones on it are disconnected).
- The management app restarts so that all settings take effect.
If you're connected through the hotspot, reconnect after importing
When the hotspot name or password is replaced, your phone or computer is disconnected at step 6. Connect to the hotspot name from the file: for a file with an export password, the hotspot password is also replaced with the source device's; without one, the password is still this device's original one. After reconnecting, refresh the page.
The management interface waits up to 3 minutes for the device to restart, and shows "Import complete" even if it doesn't come back in time; reconnect and check that the numbers are right.
Notes after the import
The completion screen may include these notes:
| Note | Meaning |
|---|---|
| The image set of schedule "name" is not in the file; skipped | The image set this schedule uses isn't in the file, so the schedule wasn't created |
| Network settings were not applied: … | Photos, image sets, schedules and settings were imported, but the hotspot settings couldn't be applied; check under "Network" |
| Import complete, but some of the original photos, image sets or schedules were not fully deleted; you can delete them manually | The file's content was imported; only some of the original content wasn't deleted. Delete it manually on the image gallery, image sets or schedules page |
Also:
- If the image set bound to a button isn't in the file, the button goes back to the whole image gallery.
- For a file exported by an older version, any settings it lacks keep this device's current values.
Copying one device's settings to another
- Export a settings file on the device that is already set up. To carry the hotspot password over too, set an export password.
- Connect to the other device and import the file.
- As the notice says, add the on-site Wi-Fi again under "Network" (the password is needed).
Both devices end up with the same hotspot name
Importing also replaces the hotspot name with the source device's. If the two devices are in the same place, phones can't tell which one to join; after importing, rename the hotspot of one of them under "Network".
- Neither device's model, brand, cluster settings or system logs are changed.
- You can import between models with different screen sizes, but photo display settings may need adjusting.
Limits
| Item | Description |
|---|---|
| File size | No fixed limit; depends on the device's free space |
| Space needed to upload | The file size plus about 50 MB |
| Space needed to apply | The size of all new photos plus about 50 MB. The uploaded file still takes up space at this point, so in practice you need free space of about twice the total photo size |
| Simultaneous imports | Only one file waiting to be imported is kept; uploading another replaces the previous one |
| Version | Files exported by older versions can be imported; to import a file from a newer version, first update this device to that version |
| Cluster | This page can't be used while you're viewing another device from the cluster; connect directly to the device you want to export from or import into |
Error messages you may see
| Message | Meaning | What to do |
|---|---|---|
| Export failed. Please try again later | Something went wrong during export, for example not enough storage for the file | Delete unused photos and try again |
| The export password needs at least 4 characters | The export password is too short | Enter at least 4 characters, or leave it blank |
| Upload failed. Please check the file and try again | The upload was interrupted or the connection is unstable | Check the connection and choose the file again |
| Not enough storage space for this settings file | The device doesn't have enough free space for the uploaded file | Delete unused photos and try again |
| This file is not an exported settings file | Wrong file selected | Choose the .zip downloaded from "Export settings" |
| This file is not an exported settings file, or it is damaged | Not a .zip file, or the file is damaged | Download or export it again |
| The settings file is damaged | The file's content has been altered or is incomplete | Export it again |
| The settings file is incomplete: N photos are missing | Some photos are missing from the file | Export it again |
| This settings file comes from a newer app version. Update this device first, then import it | The source device runs newer software than this one | First run a software update on this device, then import |
| Wrong export password, or the file is damaged | The export password you entered is wrong | Enter it again; this device's data wasn't changed |
| Not enough storage space: about X MB needed, Y MB free | The photos in the file don't fit | Delete unused photos on this device and try again; this device's data wasn't changed |
| This import could not be found. Please upload the file again | The uploaded file is no longer on the device (for example, another file was uploaded after it) | Choose the file again |
| Import failed. Nothing on this device was changed | Some other error occurred during the import; the half-imported content was removed | Try again later; this device's data wasn't changed |
Related: Data retention and what gets deleted, Factory reset, Image sets, Software update