Message reference
Messages that may appear in the management interface, grouped by feature. You can also use the search at the top right of this site and type the message text you see.
Site-wide notices
| Message | Meaning | What to do |
|---|---|---|
| Lost connection to the device | The live connection to the device has been down for more than 6 seconds | Make sure you're connected to the device's Wi-Fi and tap "Reconnect". See Connecting to the device |
| That action did not take effect — the device is unreachable | No response after the action was sent | First check the image gallery, schedules, or settings to see the result; retry only if it wasn't done |
| The device is about to sleep | 60-second idle countdown | Tap "Keep Awake" to cancel. See Sleep and wake-up |
| Orientation sensor (G-sensor) fault | The orientation sensor can't be read | Restart the device. See Hardware fault warnings |
| Real-time clock (RTC) fault | The hardware clock can't be read | Restart the device. See Hardware fault warnings |
| Cannot identify the panel; refreshing is paused | The Tcon firmware version can't be read, so images aren't displayed for now; the system keeps retrying | If it keeps appearing, restart the device or contact technical support. See Hardware fault warnings |
| Panel model not supported; refreshing is paused | The panel model isn't on the factory compatibility list | Contact technical support to update the software |
| Machine data does not match the panel | The screen size in the model data doesn't match the panel | Contact technical support to check the model data |
| Battery service unavailable — tap for details | Battery data can't be read | See Battery |
| Request failed. | The device reported that the action failed | Reload the page and try again |
| Sorry, the page you visited does not exist. | Wrong URL | Tap "Back Home" |
Error codes
"Response status:number" is an error code returned by the device, usually shown together with a text message:
| Code | Meaning | Common situations |
|---|---|---|
| 400 | The content sent is invalid | Uploading a file that isn't an image, an unsupported format, an incomplete update package |
| 404 | Not found | The image was deleted, the feature doesn't exist on this model, the temporary PDF has expired |
| 409 | Conflict or busy | The panel is refreshing; turning the light on or off manually while a light schedule is enabled |
| 413 | Too large | The image has too many pixels, the PDF is over 50 MB, the update package is over 128 MB |
| 500 | Internal device error | Damaged file, storage full, processing failed |
| 503 | Service temporarily unavailable | The battery service isn't responding, the hotspot control interface isn't enabled yet |
Image display
| Message | Meaning |
|---|---|
| All images uploaded successfully | Upload finished |
| Upload completed, some images failed | At least one failed |
| Upload failed | This image failed to upload; see Image upload fails |
| Command sent, processing in background... | The display command was accepted and the panel is refreshing |
| Send failed, device may be busy | The panel is handling another refresh |
| The screen could not be refreshed. Please try again later; if it keeps happening, check the system logs. | The panel refresh failed. See Image gallery and displaying images — When a refresh fails |
| Refreshing... | The panel is refreshing |
| Screen cleared / Failed to clear the screen | Result of clearing the screen |
| QR Code screen refreshed / Failed to refresh QR Code screen | Result of showing the startup screen |
| Screen is currently blank (reset) | The panel is currently cleared to a single background color (black or white) |
| Currently showing the QR code startup screen | The panel currently shows the startup screen |
| Image rotated to N° / Image rotation failed | Rotation result |
| Fit mode changed to "…" / Fit mode change failed | Result of the fit mode setting |
| Successfully deleted N image(s) / Deletion failed / Batch deletion failed, please try again later | Deletion result |
| These images will also be removed from the following image sets: | Reminder before deleting images, listing the affected image sets |
PDF collage
| Message | Meaning |
|---|---|
| Uploading PDF… | Uploading |
| PDF upload failed | Upload failed |
| Not a PDF file (content-type: …) | The selected file isn't a PDF |
| PDF file X.XMB exceeds the 50MB limit | File too large |
| PDF has N pages, exceeding the 60-page limit | Too many pages |
| You can select up to 30 pages | Too many pages selected |
| Please select at least one page | No pages selected |
| PDF session not found: … | The temporary file has expired (4 hours) or the device has restarted; upload again |
| Failed to generate preview | Preview generation failed |
| N image(s) created / Failed to create | Creation result |
Image sets
| Message | Meaning |
|---|---|
| Image set created successfully / Failed to create image set | Creation result (fails if the name is over 100 characters) |
| Please enter image set name | Name not filled in |
| Image set updated successfully / Failed to update image set | Rename result |
| Image set deleted / Failed to delete image set | Deletion result |
| These schedules use this image set. After deleting it they will stop changing images until you choose another image set: | Reminder before deleting an image set |
| This image set is bound to the buttons. After deleting it, the buttons will switch through the whole gallery instead. | Reminder before deleting an image set |
| The presenter menu on the device cannot draw some characters in this name… | The name is shown as "Image set N" in the presenter remote menu |
| Successfully added N images / Failed to add images | Result of adding images |
| Successfully removed N images / Failed to remove images | Result of removing images |
| Image set cleared / Failed to clear image set | Clearing result |
| Reorder failed | Drag-and-drop reordering failed and was reverted |
| Set as the button-controlled image set | The physical buttons now switch images within this image set |
| Unbound, buttons will cycle through the whole gallery | The physical buttons switch through the whole image gallery again |
| No images in this set | The image set is empty |
| No available images in gallery | Upload images first |
Schedules / light schedules
| Message | Meaning |
|---|---|
| Schedule created/Schedule updated/Schedule deleted | Action succeeded |
| Schedule enabled/Schedule paused | Enabled state changed |
| Creation failed/Update failed | Saving failed (invalid cron format, image set doesn't exist) |
| Please fix the cron expression | Invalid frequency setting |
| Please enter a schedule name/Please select an image set/Please select turn on or turn off | Required field not filled in |
| Operation failed | Enabling/disabling failed |
| Failed to update priority | Drag-and-drop reordering failed |
| Timezone mismatch | The browser and device time zones differ; see Schedules — Time zone |
| Device timezone updated to … / Failed to sync timezone | Time zone sync result |
| This image set has no images yet, so nothing will be shown when the schedule fires. | Reminder that you picked an empty image set |
| Image set created and selected / Added N image(s) | Creating an image set / adding images from the schedule form succeeded |
| Conflict | Expected to fire at the same time as another schedule; this one is ordered later and will be skipped this round |
| Disabled / Paused | The schedule won't fire for now |
| No image set selected | The schedule has no image set (the image set may have been deleted) |
Settings
| Message | Page | Meaning |
|---|---|---|
| Sleep enabled/Sleep disabled, Idle timeout updated | Sleep Settings | Settings saved |
| The system is about to restart/The system is about to shut down | Power Control | Command executed |
| System action failed. Please try again later. | Power Control | Command failed |
| Settings saved | Button Trigger Settings | Settings saved and in effect immediately |
| Gesture ranges overlapped — the other side was adjusted automatically to avoid a conflict | Button Trigger Settings | Two gestures conflicted and were corrected automatically |
| G-Sensor enabled/G-Sensor disabled | G-Sensor Settings | Settings saved |
| This hardware has no G-Sensor | G-Sensor Settings | No orientation sensor |
| Startup screen enabled/Startup screen disabled, Screen language updated | Startup Screen Settings | Settings saved |
| Scan mode saved | Tcon Scan Mode | Settings saved (takes effect the next time an image is displayed) |
| Time synchronized successfully/Time set successfully | Time Settings | Time sync complete |
| NTP auto-sync enabled/NTP auto-sync disabled | Time Settings | NTP setting saved |
| The service failed to start — another time-sync service on this device… | Time Settings | Time service conflict; contact technical support |
| Scheduled jobs switched to new timezone | Time Settings | Time zone updated |
| Timezone saved, but scheduled jobs require a service restart to apply | Time Settings | Restart the device |
| Device disconnected/Could not disconnect the device | Network | Disconnect result |
| The hotspot control interface is not enabled on this device yet; it becomes available after a restart. | Network | Available after a restart |
| Presenter remote control enabled/disabled, Page switching updated | Presenter Remote | Settings saved |
| Enable presenter remote control first | Presenter Remote | Must be enabled before the button test |
| Copied to clipboard | System Logs | Copied |
| Firmware update successful/Firmware update failed | Tcon Firmware | Update result |
| Only .bin firmware files are accepted | Tcon Firmware | Wrong file format |
| Failed to read firmware version | Tcon Firmware | Read failed |
| Battery info updated/Battery Service Unavailable | Battery Info | Read result |
Software update / factory reset
| Message | Meaning |
|---|---|
| Please select a .tar.gz update package | The file name doesn't end in .tar.gz |
| Reading update package info... | Reading the update package |
| This file is not a valid update package. Please check that the download is complete | The update package contents can't be read |
| The update package is larger than 128 MB and cannot be used | The file is too large |
| Installing update, please wait... / Will reconnect automatically after reboot | Update in progress |
| Update Successful / Update Failed / Update Result Unconfirmed | Update result; see Software update |
| Connection Timed Out | The result couldn't be confirmed within 5 minutes |
| Upload failed: checksum mismatch… | The file is damaged; download it again |
| Upload failed: update package exceeds the 128 MB limit | Not a valid update package |
| Resetting to factory defaults, please wait... | Factory reset in progress |
| Factory Reset Complete | Done |
| Factory reset failed, please try again later | Failed |
Mode switching
| Message | Meaning |
|---|---|
| Switching Mode... | Switching; don't close the page or cut the power |
| Mode Switch Initiated | The device will restart and switch to CMS mode |
| Cannot switch: sbc-display module not installed | This device has no CMS module |
| Already in CMS Mode | The device is already in CMS mode |
| Cannot switch to CMS yet | No Wi-Fi network has been saved yet; CMS mode needs the device to be connected to a network |