Bulletin board and single-panel settings
Viewing: HTML | Download the multi-panel bulletin board full feature guide as PDF
Navigation: Bulletin board
The multi-panel bulletin board manages several panels as one bulletin board: each panel has its own content playlist and rotation, and can switch between different playlists by time of day.
Applicable models
Only the multi-panel model with three 31.5" panels has the "Bulletin board". On this model the menu shows "Bulletin board", "Media library" and "Installation" instead of "Images", "Image sets" and "Schedules"; the system settings (network, update, logs and so on) work as usual. Other models do not have these pages.
Bulletin board home
The home page lists all the panels, each with a thumbnail of its current image and its state.
| Item | Description |
|---|---|
| "N/N panels OK" | The number of panels that are connected and working |
| Panel state | "Idle", "Refreshing", "Failed" or "Missing" (not connected, see When a panel is unplugged) |
| Identify | Makes every panel show its number in large digits, to compare with the nameplate on the back |
| Show QR code | The system screen panel shows the startup screen (Wi-Fi QR code and admin page address) and returns to its content after 60 seconds |
| Clear all screens | Clears all panels to white together, see Clearing the screen |
| Notice at the top | Shown when a panel is missing or plugged into a port that is not registered yet; press "Go to installation" to deal with it, see Installation |
Press a panel's thumbnail to open its settings page. Each panel card also has "Identify this panel", which makes only that panel show its number.
Single-panel page
After you open a panel from the home page, the page is titled "Panel N", and "Back to bulletin board" at the top left returns to the home page.
Current image and manual selection
- "Current image" shows what the panel is showing now and where it is in the playlist (for example "1 / 3").
- "Previous" and "Next" move between sheets. "Sheets (tap to show)" lists every sheet; tapping one shows it on the panel (after asking "Show sheet N on the panel?").
- After you pick a sheet manually, the panel pauses automatic rotation and shows "Paused manually, rotation resumes at (time)". For how long, see Pause after manual selection.
Content rotation
"Content rotation" sets how often the playlist moves to the next sheet: "Off", or "Every 1 / 5 / 10 / 15 / 30 / 60 min". Each playlist has its own interval (see the next section). "Content rotation updated" is shown after you change it.
Playlists
Each panel can have several playlists, for example "Morning" and "Evening".
| Action | Description |
|---|---|
| Default playlist | Every panel has one. It plays when no time slot is in effect |
| Add playlist | Under "Playlists", press "Add playlist" and give it a name such as "Morning" or "Evening" |
| Rename, delete | Deleting asks "Delete 'name' and the time slots that use it? The documents themselves are kept." |
| Now playing | Marks the playlist that is playing now |
| Playlist to edit | Chooses which playlist "Content", "Layout" and "Content rotation" below edit |
Layout and interval are set per playlist, so different playlists can use different layouts and intervals.
Content
In "Content" you edit the playlist you chose:
- Press Add pages and pick pages of documents from the media library (you can "Select all", "Select none", or "Show pages" to tick them one by one).
- Use "Move up" and "Move down" to change the order, and "Remove" to take an item out of the playlist (it asks first; the document itself is not deleted).
- An item's "Settings" adjust how it is shown: rotation (0 / 90 / 180 / 270 degrees), pages per sheet, gap (Default / Seamless / Custom) and the pages to show.
- With "Continue after the previous document" on, a document is placed on the previous document's last sheet if there is room; with it off it starts a "New sheet".
The items in the playlist are laid out by the "Layout" into the sheets that are shown on the panel one by one. If the playlist has no published documents, the panel is cleared to white.
Time slots
"Time slots" make the panel switch to a chosen playlist at a set time and keep it until the next slot, for example "Morning" at 8:00 and "Evening" at 17:00.
- Under "Time slots" press "Set up", then "Add time slot".
- "When" is set the same way as a schedule: choose "Fixed interval" or "Specific time". See Image change frequency in detail.
- "Switch to playlist" chooses the playlist, and "Enabled" lets you switch a slot off for the time being.
- After saving, "Time slots saved" is shown and the page shows "Next (time)".
- Until a time slot has fired, the default playlist plays; with no time slots at all, the default playlist plays all the time.
- A pause from manual selection ends at once when a time slot switches, and the new slot's playlist takes over.
Pause after manual selection
"Pause after manual selection" sets how long automatic rotation stays paused after you pick a sheet manually or clear the screen: 5, 10, 15, 30, 60 or 120 minutes. There is no automatic rotation during the pause, and afterwards it continues from the sheet you chose. When the device restarts, the pause is cancelled and every panel continues on its schedule from the sheet it is showing.
Clearing the screen
- One panel: press "Clear screen". The panel is cleared to white and its rotation pauses ("Screen cleared, resumes at (time)"). The pause length is as in the previous section.
- All panels: press "Clear all screens" on the home page. Every panel is cleared to white and pauses its rotation.
- The panel stays white during the pause; afterwards it continues from the sheet shown before. A time slot switching or a manual selection during the pause ends the white screen.
When a panel is unplugged
- The panel is marked "Missing", and the notice at the top of the home page reads "N panel(s) missing (x/y working)". If a whole group is missing, check the HUB or its upstream cable; if a single panel is missing, check that panel's CH347, cable or TCON.
- The panel's content, layout and schedule are all kept. Once it is plugged back in, it automatically shows the sheet that should be showing at the current time.
- If a different new panel was put in, or the panel was moved to another port, register it or move its settings on the Installation page.
Related chapters: Media library, Installation, Image change frequency in detail