Scan direction and refresh mode
Navigation: Settings → Display → Tcon Scan Mode
This page controls how the panel driver board (Tcon) refreshes the screen, including "Scan Direction", "Refresh Mode" (shown only for some 13.3-inch panels), and "Edge Mask", which is specific to 32-inch frameless models.
In most cases, keep the defaults. Change these only if the screen displays incorrectly or the manufacturer recommends it.
Saving and when changes apply
- Every field is saved automatically as soon as you select it; there is no save button. "Scan mode saved" appears on success, "Failed to save" on failure.
- "Changes to scan direction and refresh mode take effect on the next refresh, not immediately." After making a change, go to the image gallery and display an image to check the result.
Scan direction
"Controls the Tcon DC register scan direction. The default “Top to Bottom” is suitable for most panels."
| Option | Description |
|---|---|
| Top to Bottom (default) | Refreshes from top to bottom |
| Bottom to Top | Refreshes from bottom to top |
| Interleave | Refreshes in an interleaved order |
- Applies to refreshes of regular images and the startup screen (QR code screen).
- Clearing the screen is not affected by the scan direction.
- The old "Curtain" option has been removed; after an upgrade it changes back to "Top to Bottom" automatically.
Refresh mode
"Choose how the screen updates. Fast refresh switches images quicker; high contrast gives better contrast but switches more slowly."
Which refresh modes each panel can use is determined entirely by the manufacturer's panel compatibility list: the system reads the firmware version of the panel driver board (Tcon) to identify the panel model, then looks up the available modes and the default in the list. The system doesn't try refreshing to find out on its own.
| Option | Description |
|---|---|
| Standard refresh | The regular refresh method |
| Fast refresh | Switches images faster |
| High contrast | Better contrast, but switches images more slowly |
- Most panels have only one refresh mode; in that case the "Refresh Mode" row isn't shown, and there's nothing to set.
- Currently only two 13.3-inch panels have two modes to choose from:
| Panel | Available modes |
|---|---|
| 13.3-inch (one model) | Standard refresh (default), Fast refresh |
| 13.3-inch (another model) | Fast refresh, High contrast (default) |
- The option marked "- Default" in the menu is this panel's default mode.
- A mode chosen in an older version that this panel no longer has is changed back to the default automatically.
No images are displayed when the panel model can't be read
When the panel model (Tcon firmware) can't be read, or the model isn't in the manufacturer's compatibility list, the system can't tell which refresh mode to use, so it pauses displaying images and shows a warning at the top of the management interface:
| Warning at the top of the page | Meaning |
|---|---|
| Cannot identify the panel; refreshing is paused | The Tcon firmware version can't be read. The system keeps retrying in the background and resumes displaying images once it can read it |
| Panel model not supported; refreshing is paused | This panel's model isn't in the manufacturer's compatibility list; a software update is needed |
In this case the "Refresh Mode" row isn't shown either. If the warning doesn't go away, contact technical support; see Hardware warnings.
Edge mask
Applicable models
32-inch frameless models only. This row doesn't appear on other models.
"Overlays a black border around the panel edges on every refresh, to mitigate LCD degradation at the edge on this model."
| Setting | Default | Range | Description |
|---|---|---|---|
| Color (swatch) | Black #000000 | Any color | Click the swatch to choose; saved when you release after choosing |
| Width | 2 px | 0–100 px | Same width on all four sides; 0 turns it off |
- The edge mask applies to every image sent to the panel: regular images, the startup screen, and the mode-switching screen.
- The web preview doesn't show the edge mask; it is visible only on the panel.
- Clearing the screen is not affected (clearing wipes the whole panel).
- Changes take effect on the next refresh.
FAQ
Q: I changed a setting, but the screen didn't change? Settings apply on the next refresh. Display an image to check.
Q: I can't find the "Refresh Mode" row? This panel has only one refresh mode, so there's nothing to choose. Only two 13.3-inch panels offer a choice.
Q: The screen looks wrong after choosing a different refresh mode? Change back to the mode marked "- Default".
Q: I can't find the edge mask? Only 32-inch frameless models have this setting.
Related: How images are processed, Characteristics of cholesteric LCDs, Tcon firmware update