Glossary
Listed in Chinese stroke order and English alphabetical order.
Chinese terms
| Term | Description |
|---|---|
| Clear screen (M0 Reset) | Wipes the whole panel to a single background color. Most panels clear to white; some firmware clears to black, also called clearing to black. The system clears the screen automatically before shutdown, reboot and mode switching; you can also do it manually. See Image gallery and displaying images |
| Refresh, display an image on the panel | Shows an image on the panel. Each refresh takes some time (depending on the model and refresh mode, for example about 6 seconds on 13.3-inch, about 16 seconds on 27.6-inch, about 20 seconds on 32-inch) |
| Refresh QR Code | Shows the connection startup screen on the panel again |
| Refresh mode | The waveform the panel uses to refresh; the menu shows it by effect as "Standard refresh", "Fast refresh" or "High contrast". The available modes depend on the panel model, and most panels have only one. See Scan direction and refresh mode |
| Next Run | When the schedule triggers next |
| Disabled, Paused | The schedule currently won't trigger. The card view says "Disabled" and the table says "Paused"; they mean the same thing |
| Effective resolution | The screen size after taking the device orientation into account. Width and height swap in portrait |
| Sleep | The power-saving state the device enters when idle: hotspot off, image kept, wakes up automatically before a schedule. See Sleep and wake-up |
| Fixed Orientation | The orientation the screen uses when G-Sensor auto-rotate is off |
| Cluster | Several devices on the same network paired together; from any one of them you can view and operate the others. See Cluster: managing devices together |
| Cluster member | A device that has been paired into the cluster |
| Conflict | Two or more enabled schedules are due to trigger at the same moment; the one listed later is skipped this round |
| Light | The light is optional equipment |
| Status LED | The indicator light on the device that shows its operating status. See Status LEDs |
| Scan direction | The direction the panel refreshes in: top to bottom, bottom to top, interleave |
| Image gallery | All uploaded images |
| Image collection | Same as "image set". Some screens in older versions used this name; the screens now all say "image set" |
| Image set | An ordered group of images that schedules and buttons step through. See Image sets |
| Startup screen | The screen shown on the panel at startup, with two connection QR codes |
| Light schedule | A schedule that turns the light on or off automatically at set times |
| Standalone mode | The mode in which you manage the device on site through its hotspot or the on-site network (the mode this manual covers) |
| Skipped | The panel was refreshing when the schedule triggered, so no image change happened this round; it plays at the next successful trigger. If it keeps getting skipped, move the times apart |
| Change frequency, trigger frequency | How often a schedule triggers. See Schedule frequency in detail |
| Fit mode | How an image is handled when its aspect ratio differs from the panel: Fit, Fill, Stretch, Crop |
| Schedule | A schedule that automatically moves to the next image in the image set by time. See Schedules |
| Hotspot | The Wi-Fi broadcast by the device itself; once your phone connects, you can open the management interface. It's also one of the three network modes (hotspot only, the factory default). See Network settings |
| Wi-Fi mode | The network mode in which the device connects to the on-site Wi-Fi and the hotspot is off |
| Concurrent | The network mode in which the device connects to the on-site Wi-Fi and keeps the hotspot at the same time |
| Presenter remote | An off-the-shelf presentation clicker; once its USB receiver is plugged in, you can change images and open the presenter remote menu. See Presenter remote |
| Bistable | The property of cholesteric LCDs that keeps the image without power |
| Edge mask | On 32-inch frameless models, a border added around the panel to slow down edge degradation |
| Firmware | The internal program of the panel driver board (Tcon) |
| Factory reset | Deletes all images, schedules, settings and Wi-Fi networks added by users, and returns the hotspot to this device's factory values. See Factory reset |
English terms and abbreviations
| Term | Description |
|---|---|
| BMS | Battery Management System, which handles battery charging, discharging and protection |
| CMS, CMS central control mode | CMS is a Content Management System; our product is the E-Paper Content Management System. It manages many devices from one web console: sending images remotely, changing images on a timer with playlists and schedules, monitoring each device's connection status and alerts, managing devices in groups, and updating device software remotely. CMS central control mode is the mode in which a CMS manages the device remotely. See E-Paper Content Management System, CMS connection and control, CMS / standalone mode switching |
| Cron, cron expression | A format for describing schedule times, for example */10 * * * * means every 10 minutes |
| dBm | Unit of Wi-Fi signal strength; the closer to 0, the stronger |
| EXIF | Shooting information stored in a photo, including the shooting orientation |
| G-Sensor | Orientation sensor that detects how the sign is mounted |
| NTP | A way of setting the time automatically over the network |
| OTA | Software update by uploading an update file in the management interface |
| RTC | Hardware clock that keeps time while the device is asleep or powered off |
| SOC | Battery remaining charge, in percent |
| SOH | Battery health, in percent |
| SSID | Wi-Fi network name. In this manual it mostly means the name of the device's hotspot, which you can change in Network settings |
| Tcon | Panel driver control board |