Skip to content
This page was translated from the Traditional Chinese original and has not yet been reviewed by a person. If anything is unclear, the Chinese version is authoritative.

Viewing: HTML | Download the full feature guide as PDF

Cluster tools for multiple devices ​

Navigation: Settings → System → Cluster → "Manage several devices"; one-click sync is in the upper right of the Image Sets and Schedule pages

Once devices form a cluster, besides switching from one device to work on another, you can also do the same thing on several devices at once. This page describes these multi-device tools.

The "Manage several devices" section appears only when this device is in a cluster that has other members. All the tools below are started from the device you are connected to, which then sends the work to the chosen devices one by one or all at once.

Tools at a glance ​

ToolWhereWhat it does
One-click sync ("Sync to other devices")Upper right of the Image Sets and Schedule pagesCopies image sets or schedules (with their images) to other devices
Shared across the clusterImage set management screenKeeps one image set the same on all devices; later changes are synced automatically
Overview wallManage several devicesSee every device's current screen, battery level and version on one page
Batch actionsManage several devicesSelect several devices and change the image, clear the screen, switch schedules or restart them in one go
Rolling updateManage several devicesUpload an update package once and update the devices one by one
Change pages togetherManage several devicesA group of devices shows the same image of the same image set together
Tile a large imageManage several devicesSplits one large image and assembles it into a wall across several devices placed side by side
Copy settingsManage several devicesApplies this device's settings to other devices
Find this device, groups, alerts, activity logCluster pageRecognize devices on site, group them, get alerts, see who changed this device

Choosing target devices ​

Sync, batch actions, rolling update, change pages together and copy settings all use the same device list to choose targets:

  • Select all: selects every device that can currently be chosen.
  • Model filter: when the cluster has different models or resolutions, a drop-down above the list lets you show only one of them (default "All models").
  • Group buttons: when devices have a "Location" filled in, a button for each location appears above the list. Click one to select the whole group.
  • Devices that cannot be chosen are faded and show the reason:
ReasonMeaning
Not respondingThat device cannot be reached right now
Temporarily away / asleep / switching networksThat device has announced that it is temporarily away; see During sleep and network switching
Older version; update it…That device's version does not support this action
Identity problem; rejoin the cluster from that deviceSee Identity problem

Results per device ​

After you send the job, the window lists the progress and result of each device: "Waiting", "In progress", "Done", "Skipped", or the reason it failed.

ResultMeaning
Not respondingThat device cannot be reached
Asleep (expected to wake at HH:MM); resend after it wakesThat device is asleep
Busy; try again laterThat device is refreshing its panel or handling other work
Not foundThat device has no image set or schedule with the given name
Older version; update it firstUpdate that device first
Timed outIt took too long and did not finish
Not started because an earlier device failedThe rolling update stopped after the previous device failed
FailedSome other reason, with an explanation after it

When it is done, if some devices failed, you can click "Redo the failed devices" (for sync, "Resend to failed devices") to run it again on just those devices. Failed devices are not retried automatically. For example, when a device that was asleep wakes up, you have to click it again.

Results are kept only on this device

Job progress and results are stored only on the device you are connected to. After this device restarts, the result page shows "This job is no longer available (this device may have restarted)". Content already sent to the other devices is not affected.

One-click sync ​

Copies this device's image sets or schedules, along with the images in them, to other devices in the cluster.

The "Sync to other devices" button appears:

  • In the upper right of the Image Sets list, and in the upper right of the image set management screen (the image set you have open is selected by default)
  • In the upper right of the Schedule page

The button appears only when this device is in a cluster, has other members, and no other device is chosen in the header: the source of a sync is always the device you are connected to. At phone width, only the send icon is shown.

Steps ​

  1. Click Sync to other devices.
  2. "Content": select the image sets or schedules to send. When you sync schedules, the image sets and images they use are sent along with them. Click Next.
  3. "Devices": select the target devices and click Next.
  4. "Same name": choose what happens when the other device already has an item with the same name (default "Do not send").
OptionEffect
Do not sendThat device stays as it is; the result lists the duplicate names
Save as a copyA number is added to the name, for example "Lobby (2)"
OverwriteReplaced with this device's content; the replaced images stay in that device's image gallery. Choosing this brings up an "Overwrite?" confirmation. It cannot be undone
  1. Click Send. The top of the window shows how much will be sent this time, for example "1 photo sets, 0 schedules, 12 images (35.2 MB)", and below it the progress of each device, such as "Sending images 3/12".

Sync rules ​

  • Devices are sent to one at a time, in order. A failure on one device does not affect the next.
  • Original images are sent, and each device converts them for its own resolution and settings, so different models can sync with each other.
  • Images the other device already has are not sent again; only the missing ones are added.
  • Each device applies everything at once only after all the images have arrived. If it fails partway, everything added to that device this time is removed and its existing content is left untouched.
  • A sync only stores data. It does not make the other device change its image right away.
  • Synced schedules keep their original enabled/disabled state. A newly created schedule is placed after all the other schedules on that device, so it does not take over the schedule that device is currently playing. With "Overwrite", that device keeps its original order.

Why a sync might fail ​

MessageWhat to do
That device is receiving another sync; resend laterA device can receive only one sync at a time
Not enough space: needs N MB, only N MB freeFree up space in that device's image gallery first
Items with the same name already exist; nothing was sent: name"Same name" was set to "Do not send"
Not responding (it may be off, asleep or off the network)Check that device's status and resend
Older version; update it to receive syncsUpdate that device first

Image sets shared across the cluster ​

Once an image set is set to "Shared across the cluster", it is sent to every device in the cluster, and from then on changes or deletion on any device are applied to every device. Devices that join the cluster later also receive all shared image sets automatically.

How to set it up ​

  1. Go to Image Sets and click the image set you want to share to open its management screen.
  2. Turn on the "Shared across the cluster" switch.
  3. At "Share this photo set across the cluster?", click Share.
  4. "Now shared; it will be sent to the other devices shortly" is shown. In the image set list, "Shared" is shown under this image set's name.

The "Shared across the cluster" switch appears only when this device is in a cluster and no other device is chosen in the header.

Sharing rules ​

SituationResult
Changed on any device (images added, removed, reordered, renamed)Sent to the other devices about 20 seconds after the first change; several changes in that time are combined into one
This image set is deleted on any deviceIt is deleted on the other devices too; the images stay in each device's image gallery
An image used in the image set is deleted on any deviceCounts as a change to the image set; the image is removed from the image set on the other devices too
"Shared across the cluster" is turned off"No longer shared (copies on other devices are kept)" is shown. This device just stops taking part; the copies on other devices are kept
A device is asleep or not respondingMissed changes are applied when it comes back: every device compares notes with the other members every 10 minutes
A new device joins the clusterIt receives all shared image sets automatically
A device already has an image set with the same name that is not sharedA copy is saved with a number added to the name, for example "Lobby (2)"

Do not change the same shared image set on two devices at the same time

If two devices each change the same shared image set before they have compared notes, only one of the changes is kept and the other is overwritten. Finish your changes on one device and wait until the other devices have received them before changing it again.

Overview wall ​

Navigation: Cluster → Manage several devices → Overview wall → "View"

See what is currently on every device's screen, plus battery level and version, on one page, updated every 30 seconds. When devices have a "Location" filled in, they are shown in sections by location.

What the card showsMeaning
A thumbnail of the current screenThe image that device is showing right now
QR start screenThat device is showing the startup screen
No image shownThat device is not showing an image from the image gallery right now
Could not read the screenThat device can be reached, but its screen information cannot be read
Not responding / Asleep…That device cannot be reached or is temporarily away
Battery level in the upper rightShown only on models with a battery
BottomName and version ("This device" is added for the device you are connected to)

Click any card to switch to that device, the same as choosing it in the device menu in the header. You can then work on it directly.

Batch actions ​

Navigation: Cluster → Manage several devices → Batch actions → "Start"

Select several devices and do the same action on all of them at once. All the selected devices run it at the same time, so screen actions change together.

ActionDetails
Clear the screenClears the panel to a single background color
Show the QR start screenShows the startup screen on the panel
Show the first image of a photo setEnter an image set name (this action is selected by default)
Turn a schedule onEnter a schedule name
Turn a schedule offEnter a schedule name
RestartAsks "Restart these N devices?" before sending
  • Image sets and schedules are looked up by name on each device, so each device needs an image set or schedule with the same name (usually one that was synced or shared to it). While you type, the names on this device are listed for you to choose from. If a device cannot find it, its result shows "Not found"; an empty image set also counts as not found.
  • Batch actions do not include this device itself as a target.

Rolling update ​

Navigation: Cluster → Manage several devices → Rolling update → "Start"

Upload an update package once and have the devices in the cluster update one by one, stopping as soon as any device fails.

  1. Click "Choose the update package (.tar.gz)" and choose the update file. Only .tar.gz is accepted.
  2. Select the devices to update. They are updated in the order of the list.
  3. Click Start updating.

Update rules ​

  • Each device goes through "Sending the update package" → "Updating (restarts)" → "Done" in turn.
  • The next device starts only after the current device has finished updating and has come back with the correct version.
  • Devices that are already on this version are "Skipped", for example "Already 1.11.0".
  • If any device fails, the update stops and the remaining devices are marked "Not started because an earlier device failed".
  • Each device gets up to 10 minutes; after that, "The update was not confirmed as finished within 10 minutes" is shown.
  • You can click "Stop" while it is running: it stops after the current device finishes, and the rest are not updated.
  • This device itself is not in the list. After all the other devices are updated, update this device yourself from its Software update page.

Try one device first

We recommend selecting just one device first, and updating the others once you have confirmed it works. A single device updates the same way as in Software update (OTA) (which data is kept, and going back to the old version on failure).

Change pages together ​

Navigation: Cluster → Manage several devices → Change pages together → "Start"

Have a group of devices show the same image of the same image set together, or move to the next image together at regular intervals. This device can join the group too.

  1. Enter an image set name and choose an image set that every device has (for example a shared or synced one).
  2. Choose how:
    • "Show the first image, then change manually"
    • "Switch to the next image together on a timer": enter the number of seconds, 60 seconds by default, at least 30 seconds, at most 86400 seconds (one day).
  3. Select the devices and click Start. All devices show the first image together.
  4. Once started, the window shows "“image set” image N". You can click "Previous" or "Next", or enter an image number and click "Show this one". Each device's result shows "Shown (N images)" or the reason it failed.
RuleDetails
Different numbers of imagesDevices with fewer images start over from the first one
When images changeThis device tells all devices to change at the same moment; it does not rely on each device's clock
Each device's own schedulesEach device's own schedules still run as usual and may replace the image shown by change pages together. If needed, turn those schedules off first with Batch actions
This device's sleepWhile timed page changes are running, each change counts as this device being in use

Timed page changes continue after you close the window

If you chose "Switch to the next image together on a timer" and then close the window, the timed page changes keep running in the background on this device, so you do not need to keep the web page open. While it is running, the "Change pages together" row on the Cluster page says "Running: “image set” changes together every N s". Click "Start" to return to this window, where you can check the progress or click "Stop".

Tile a large image ​

Navigation: Cluster → Manage several devices → Tile a large image → "Start"

Split one large image and assemble it into a wall across several devices placed side by side. It works best with the same model, all placed in the same orientation.

Creating a layout ​

  1. Click "New layout" and enter a layout name (up to 60 characters, for example "Lobby wall").
  2. Set the number of "rows" and "columns", 1 to 6 each. A new layout starts with 1 row and 2 columns.
  3. Choose the device for each cell (this device can be used too). A device can be in only one cell; cells can be left empty.
  4. Click Save layout. On success, "Layout saved" is shown.

Saved layouts are listed at the top of the page as "name (rows×columns)". Click one to load it; the trash icon next to it deletes it. Layouts are stored on the device you are connected to. Layout names must be unique; a duplicate shows "A layout with this name already exists".

Sending the large image ​

  1. Click "Choose the image" and choose an image. Once chosen, the large image is previewed with a grid on top showing which device each cell is.
  2. Click Split and send (the layout is saved automatically first).
  3. This device splits the image into equal parts and sends them to each device in turn, and once everything has been sent, all devices show their parts together.
  4. If everything succeeds, "All sent and shown together" is shown. If some failed, "Some devices did not finish; see below" is shown, with the result for each device. A device that received its part but could not show it is marked "Sent, but not shown" with the reason.

How the image is split ​

  • Each cell is an equal share of the whole image (1/columns of the width × 1/rows of the height). The bezels between screens are not taken into account.
  • Each device displays its part in "fill" mode, filling its own screen, so the edges may be trimmed slightly. It is best if the large image's aspect ratio is close to that of the whole wall.
  • The part of the image for an empty cell is not shown.
  • The part each device receives is saved as the image set 拼接:layout name. Sending again overwrites this image set.

Copy settings ​

Navigation: Cluster → Manage several devices → Copy settings → "Start"

Applies this device's current settings to other devices. Select the categories to apply ("Sleep", "Buttons" and "Start screen and language" are selected by default), select the target devices, and click Apply.

CategoryWhat is applied
SleepWhether sleep is enabled, and how long the device stays idle before sleeping
ButtonsThe trigger method and button for clearing the screen and refreshing the QR code, the long-press duration, the double-press interval, and the bound image set
PresenterWhether the presenter remote is enabled, and how the presenter remote / physical buttons change pages (switch immediately or wait until done)
Start screen and languageWhether the startup screen is shown, the screen language, and the address shown on the startup screen
Time zoneThe device time zone
  • Scan mode, refresh mode and edge mask depend on the panel and are not applied.
  • The image set bound to the buttons is looked up by name on the other device. If that device has no image set with the same name, its buttons are set to no bound image set (switching through the whole image gallery), and the result notes "That device has no “name”, so the buttons are not bound to an image set".
  • Copy settings does not include this device itself as a target.

Find this device ​

Click Flash it in the "More" menu of a device's tile on the Cluster page, so that people on site can tell which device it is:

  • A banner with the name appears over that device's screen and its status LED flashes for 15 seconds, after which the original image is shown again. The web page shows "“name” is showing its name and flashing its light for 15 seconds".
  • When that device's panel is busy (refreshing, or with a pairing code or the presenter remote menu open), only the LED flashes, and the web page shows "“name” is busy, so only its light flashes for 15 seconds".
  • If the name contains characters the screen font cannot show, the banner shows the IP address in large text instead.
  • Devices that are not responding do not have this option.

Groups ​

Use "Rename" in the tile menu to fill in a "Location" for each device (for example "Front desk, 1F"), and the devices are grouped by location:

  • The tiles on the Cluster page, the device menu in the header and the overview wall are all divided into sections by location. Devices without a location go under "Ungrouped", listed last.
  • When choosing target devices, a button for each location appears above the list. Click one to select the whole group.
  • If no device has a location filled in, there are no sections.

Alerts ​

A yellow "Needs attention" appears above "Devices in the cluster" on the Cluster page, and a red dot appears in the upper right of the device menu button in the header:

AlertCondition
"name" has not responded for N hoursNo response for more than 1 hour. Devices that announced they are asleep are not counted
"name" is down to N% batteryBattery level below 20%
"name" has an identity problem; rejoin it from that deviceSee Identity problem

Click a name in an alert to open that device's details.

Activity log ​

Navigation: Cluster → Activity log → "View"

Lists the changes other devices in the cluster have made to this device, such as "Changed the image", "Changed a slideshow schedule", "Received a sync" and "Restarted". Each entry shows the time, which device made it and the address of the user who did it, for example "From “Counter left” (user 192.168.1.20)". Actions that did not succeed are marked "Failed (status code)".

  • Only actions that change this device are recorded. Just viewing is not recorded, and neither are actions done by connecting to this device directly.
  • The page shows the latest 200 entries. Entries are kept for 90 days, up to 5000 entries; older entries beyond that are deleted automatically.
  • When another device is chosen in the header, you see that device's activity log.
  • When there are no entries yet, "No other device has changed this one yet" is shown.

Related sections: Cluster: managing devices together, Image sets, Schedules, Software update (OTA), How images are processed

Green Ideas Technology